Camping Mattresses Compared

Compare four self-inflating camping mattresses by exact size, R-value, listed weight and packed dimensions. Find a setup that fits your tent and car.

Sleep Systems / Sleeping pad selection / Car-camping mattresses

One sleeper · Vehicle-access camping · Foam and air

Compare the bed at camp and the bundle in your car.

Four self-inflating mattresses, with the exact sizes kept beside their specifications. Start with fit, then compare the packing and setup tradeoffs.

The best camping mattress for a site beside the car should fit your body, tent and available luggage space. This shortlist compares four foam-and-air models: Therm-a-Rest MondoKing 3D, Sea to Summit Comfort Deluxe, NEMO Roamer and Therm-a-Rest BaseCamp. It focuses on one-person configurations for car camping.

The comparison uses manufacturer specifications checked November 18, 2026. We have not sleep-tested these mattresses. The reasons to consider each model follow from its documented dimensions and design; they are not comfort-test awards. For the wider decision, begin with how to choose a sleeping pad.

Camping mattress comparison: four specific sizes

The size names below belong to different brands. “Large,” “Regular Wide” and “Single” are not interchangeable dimensions. Manufacturer-rounded imperial and metric figures are shown together; packed dimensions describe a bundle, not a calculated volume.

Manufacturer specifications for the named configurations
Mattress and sizeSleeping dimensions and thicknessR-valueListed weight and basisPacked dimensions
MondoKing 3D
Large, SKU 14020
77 × 25 × 4.25 in
196 × 64 × 11 cm
7.04 lb 6 oz / 1.99 kg
Manufacturer’s weight
26 × 10.3 in
66 × 26 cm
Comfort Deluxe
Regular Rectangular Wide
72 × 25 × 4 in
183 × 64 × 10 cm
7.769.5 oz / 1.97 kg
Packed weight
28 × 7 × 7 in
70 × 18 × 18 cm
Roamer
Single
76 × 25 × 4 in
193 × 64 × 10.2 cm*
7.04 lb 7 oz / 2.0 kg
Packed weight
14 × 8.5 in diameter
35 × 22 cm diameter
BaseCamp
Regular, SKU 14030
72 × 20 × 2 in
183 × 51 × 5 cm
6.02 lb 8 oz / 1.14 kg
Manufacturer’s weight
21 × 8.5 in
54 × 22 cm

*Roamer’s 10.2 cm thickness is our rounded conversion of the listed 4 inches. The two Therm-a-Rest pages label their figures “Weight”; Sea to Summit and NEMO separately identify packed weight. These are not measurements of four complete kits on the same scale.

1. MondoKing 3D Large: a longer, deep-foam option

Top view of a blue Therm-a-Rest MondoKing 3D sleeping pad
MondoKing 3D product photo. Compare the listed Large dimensions with your sleeping space. Product photo: Therm-a-Rest.

The MondoKing 3D Large is worth comparing when you want a longer sleeping surface while keeping the width at 25 inches. Therm-a-Rest lists StrataCore foam construction, separate TwinLock inflation and deflation valves, and an included pump/stuff sack.

Reason to consider it: its listed length and depth suit a shortlist built around a substantial single-person bed. Reason to reconsider: the packed roll needs a long, wide storage space. Mark that bundle out in your vehicle before assuming it will fit around the rest of your luggage. Try your usual sleeping position rather than inferring support from depth.

2. Comfort Deluxe Regular Wide: width in a shorter footprint

Green Sea to Summit Comfort Deluxe Regular Wide self-inflating mat
Comfort Deluxe Regular Rectangular Wide. The current version has a different specification from older Comfort Deluxe SI listings. Product photo: Sea to Summit.

The current Comfort Deluxe Regular Rectangular Wide keeps a 25-inch width in a 72-inch length. Sea to Summit lists Air Frame construction, an XPEL valve and a storage sack that also serves as a pump sack.

Reason to consider it: you want a wide sleeping surface without the longer footprint of the MondoKing Large or Roamer Single. Reason to reconsider: the shorter length may not leave the head and foot room you want. Check the current version carefully: do not combine an older Comfort Deluxe review with the specifications in this table.

3. Roamer Single: compare the packed shape

Grey and green NEMO Roamer Single self-inflating camping mattress
Roamer Single product photo. Keep Single and Single Wide specifications separate when shopping. Product photo: NEMO.

The Roamer Single combines a 25-inch sleeping width with a notably shorter listed packed bundle. NEMO identifies Flow Core foam, a Laylow valve and included inflation and repair accessories.

Reason to consider it: you need a deep mattress but have limited room for a long rolled bundle. Reason to reconsider: the packed kit still weighs around 2 kg. Its 1.81 kg minimum-weight figure excludes parts of that kit, so keep the weight basis attached to the number. Single Wide is another size; it cannot inherit the Single measurements.

4. BaseCamp Regular: a shallower, narrower alternative

Blue Therm-a-Rest BaseCamp sleeping pad shown at an angle
BaseCamp manufacturer photo, with Large shown. This comparison uses the narrower Regular size. Product photo: Therm-a-Rest.

The BaseCamp Regular changes both the bed and the carrying burden: its listed surface is 20 inches wide and 2 inches thick. Therm-a-Rest specifies a WingLock valve and includes a stuff sack.

Reason to consider it: your sleeping layout works with a narrower surface and you want to compare a shallower foam mattress. Reason to reconsider: the missing five inches of width can matter when you turn. Test your shoulder and hip support with the intended firmness. A lower profile is a different sleeping surface, not proof that it is less comfortable for every camper.

Choose with a real tent layout

Before ordering, outline the proposed bed on the tent floor. Include the other sleeper’s mattress, any stored bags and the route to the door. Compare the floor width at the point the beds will occupy, especially if the tent tapers. If you are considering a raised bed, compare camping cots and sleeping pads before choosing the mattress.

For example, two nominal 25-inch mattresses need 50 inches (127 cm) before any gap or surrounding space. A 25-inch mattress beside a 20-inch one needs 45 inches (114.3 cm). These are width sums, not complete tent-fit checks. Wall slope and the height of your sleeping bag can reduce the useful room above the floor. Use the camping tent size guide for the next check.

  1. Fit the sleeper: check length, turning room and the supported area under your normal sleeping position.
  2. Fit the shelter: lay out every bed and assess access to the door with bedding in place.
  3. Fit the transport: reserve space for the packed mattress, inflation equipment and repair supplies.
  4. Check the specification: keep the exact model, generation and size with the listed R-value and weight basis.
  5. Check the buying details: confirm current US or Canadian stock, the chosen size and the seller’s return conditions before paying.

Plan the setup and storage routine

A self-inflating mattress uses expanding foam to draw air in, but you may need to add air to reach the intended firmness. Follow the instructions for the actual valve and pump sack. Try the full routine at home, including packing it back into its bag.

Also decide where a bulky mat will live between trips. The manufacturer’s long-term storage directions may call for a different arrangement from the tightly rolled transport bundle. Compare the handling differences in foam, air and self-inflating sleeping pads, and keep the complete kit on your car camping checklist.

Camping mattress questions

Which camping mattress is the most comfortable?

Specifications cannot establish one winner for every sleeper. Use the shortlist to find dimensions and packing that work, then try the exact mattress in your usual position. Firmness, turning room and the rest of the bedding are part of that trial.

Can I use these mattresses for backpacking?

Evaluate the entire carried kit and packed shape before doing so. This comparison is aimed at vehicle-access camping. A mattress that fits comfortably in the car may consume too much pack space or carrying capacity for a walking trip.

Does self-inflating mean no pump is needed?

Not necessarily. Foam expansion starts the process, and additional air can be needed for the intended firmness. Check the model’s instructions and supplied equipment rather than assuming every self-inflating valve works the same way.

Can I join two single camping mattresses?

Check the manufacturer’s specific joining system and the resulting layout. NEMO lists connection toggles and loops for Roamer Single and Single Wide. Sea to Summit says its Coupler Loops are not compatible with Comfort Deluxe. Similar widths do not establish accessory compatibility.

Sources and method: The linked manufacturer pages supply the specifications for the four named sizes. Product photographs are credited to the manufacturers; the BaseCamp image shows a different size from the Regular used in the table. This is a specification-based comparison, not an overnight test or a market-wide ranking. Layout sums and shortlist checks are editorial aids. Recheck the exact listing when buying, especially model revisions, accessories and local availability.

Pick It or Leave It? Rate Now!
( No ratings yet )
Spread The Adventure
The Bridge - Adventure Review Portal